Table of Contents
Advertisement
Cisco Remote PHY Shelf 7200 High Availability Guide for Cisco Remote PHY Shelf 7200 Software 1.1
---------------------------
Backhaul |State
---------|-----------------
0
4
---------|-----------------
1
5
---------|-----------------
2
6
---------|-----------------
3
7
---------------------------
Feature Information for Port Mapping and Link Redundancy
Use Cisco Feature Navigator to find information about the platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software release,
feature set, or platform. To access Cisco Feature Navigator, go to the
on the Cisco.com page is not required.
Note
The following table lists the software release in which a given feature is introduced. Unless noted otherwise,
subsequent releases of that software release train also support that feature.
Table 16: Feature Information for Port Mapping and Link Redundancy
Feature Name
Port Mapping and Link
Redundancy
Role
|Active
Primary
|Standby Secondary
|Active
Primary
|Standby Secondary
|Active
Primary
|Standby Secondary
|Active
Primary
|Standby Secondary
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Feature Information for Port Mapping and Link Redundancy
Releases
Cisco Remote PHY Shelf 7200
Software 1.x
www.cisco.com/go/cfn
link. An account
Feature Information
This feature was introduced on the
Cisco Remote PHY Shelf 7200
device.
51
Advertisement
Table of Contents
