Depi/Uepi/L2Tp Integration With Rpd; Hardware Compatibility Matrix For Cisco Remote Phy Shelf 7200 - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

DEPI/UEPI/L2TP integration with RPD

This document describes how to configure the DEPI/UEPI/L2TP integration with RPD on the Cisco cBR
Series Converged Broadband Router.
Finding Feature Information
Your software release may not support all the features that are documented in this module. For the latest
feature information and caveats, see the release notes for your platform and software release. The Feature
Information Table at the end of this document provides information about the documented features and lists
the releases in which each feature is supported.
•
•
•
•
Hardware Compatibility Matrix for Cisco Remote PHY Shelf
7200
Note
Unless otherwise specified, the hardware components introduced in a given Cisco Remote PHY Shelf 7200
Software Release are supported in all subsequent releases.
Table 6: Hardware Compatibility Matrix for the Cisco Remote PHY Shelf 7200
Cisco CMTS Platform
Cisco cBR-8 Converged Broadband Router with
Cisco IOS XE Gibraltar 16.10.1 and Later Releases
Hardware Compatibility Matrix for Cisco Remote PHY Shelf 7200, on page 27
Information about DEPI/UEPI/L2TP integration with RPD, on page 28
How to Configure DEPI/UEPI/L2TP integration with RPD, on page 28
Feature Information for DEPI/UEPI/L2TP integration with RPD, on page 30
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
4
C H A P T E R
Cisco Remote PHY Shelf 7200
Cisco Remote PHY Shelf 7200 Software 1.1 and
Later Releases
Cisco Remote PHY Shelf 7200
• PID—HA-RPHY
27