Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference page 21

Cisco Remote PHY Shelf 7200 Start Up Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Configuring DHCP Server using IPv4
3. Define suboption. Fill in the name, type and repeat of suboption 61 as shown in the following figure.
4. Add the option into policy as shown in the following figure. Replace the IP address 120.102.15.1 in the
figure to the DPIC port IP address.
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
9