Combination Switch - Mercedes-Benz 190 E 2.3 Owner's Manual

Combination Switch

1 Low beam (turn lighting switch
clockwise two notches)
2 High beam (turn lighting switch
clockwise two notches)
3 High beam flasher (high beam
available independent of lighting
switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move the
combination switch past the point of
resistance (up or down). The switch is
automatically cancelled when the
steering wheel is turned by a large
enough angle.
To signal minor directional changes of
the vehicle, such as changing lanes on
a highway, move combination switch to
the point of resistance only and hold it
there.
6 Control for windshield washer
system
When the washer system is
switched on, the wipers also
operate.
7 W indshield wiper speeds
0 W indshield wiper switched off
1 Intermittent wiping
II Normal wiper speed
III High wiper speed
Hints:
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds at a faster sequence than un­
der normal operating conditions.
Fog lamps will only operate together
with low beam headlamps. Fog lamps
are turned off automatically when light­
ing switch is returned to off-position.
35