Siemens SIMATIC NET S7-400 Manual page 26

Requirements for use
3.4 Programming
For fast data transmission up to a data length of 1452 bytes, the SPEED SEND/RECEIVE
program blocks AG_SSEND (FC53) and AG_SRECV (FC63) are supported.
Functionality
Transfer of data fields <= 240 bytes
Transfer of blocks of data > 240 bytes to <= 8192 bytes
Accelerated transfer of blocks of data <= 1452 bytes
The length depends on the protocol
*)
Note
Multicomputing mode
Note that in multicomputing mode, communication using SPEEDSEND/RECV is possible
only via the CP assigned to the CPU.
Note
Operation with a high communications load
Note the recommendations in section Recommendation for use with a high communications
load (Page 45) for operation with a high communications load.
26
Requirement
You require the program blocks AG_SEND (FC5) and
•
AG_RECV (FC6) or alternatively the program blocks
AG_LSEND (FC50) and AG_ LRECV (FC60).
*)
You require the program blocks AG_LSEND (FC50) and
•
AG_LRECV (FC60).
You require the program blocks AG_SSEND (FC53) and
•
AG_SRECV (FC63).
CP 443-1 RNA
Manual, 03/2019, C79000-G8976-C299-04