TP-Link TL-WR850N User Manual page 32

Chapter 4
Done!
Note:
Still not being able to access IPv6 resources means that not any 6to4 public server was found in your network. You can
contact your ISP to sign up for IPv6 connection service.
4 3 8 2 Specify the 6rd Tunnel with Parameters Provided by Your ISP
I want to:
3. Tick the check box, select
and select a WAN connection from the drop-down list, then
click Save.
Note:
If there is no available WAN connection to choose, make sure you have connected to the
Internet and the connection type is not Bridge.
Now you can visit the IPv6 websites with the 6to4 tunnel.
Specify the 6rd tunnel with the parameters provided by my 6rd
tunnel service provider.
1. Visit http://tplinkwifi.net, and log in with the password you
set for the router.
2. Go to Advaced >
3. Tick the check box, select
and select a WAN connection from the drop-down list.
4. According to the parameters provided by your ISP, choose
Auto or Manual. More parameters are needed if you choose
Manual.
5. Click Save.
Configure the Router in Wireless Router Mode
6to4 as the tunneling mechanism
Network > IPv6 Tunnel.
6rd as the tunneling mechanism
28