TP-Link TL-WR850N User Manual page 46

Chapter 4
3. Enable DoS Protection.
4. Set the level (Low,
UDP-FlOOD Attack Filtering
• ICMP-FLOOD Attack Filtering
Message Protocol) flood attack.
• UDP-FlOOD Attack Filtering
flood attack.
• TCP-FLOOD Attack Filtering
Protocol) flood attack.
5. Click Save.
Tips:
1. The level of protection is based on the number of traffic packets. Specify the level at
2. The protection will be triggered immediately when the number of packets exceeds the preset threshold value, and the
vicious host will be displayed in the
Middle or High) of protection for
and TCP-FLOOD Attack
- Enable to prevent the ICMP (Internet Control
- Enable to prevent the UDP (User Datagram Protocol)
- Enable to prevent the TCP (Transmission Control
Blocked DoS Host List.
Configure the Router in Wireless Router Mode
ICMP-FLOOD Attack
Filtering.
DoS Protection Level
Filtering,
Settings.
42