Remote Control Power Supply - Wolf BM-Solar Installation And Operating Instructions Manual

Electrical connection
Remote control
6
Installation
The electrical connection must only be carried out by a qualified
electrician.
Never route sensor leads alongside mains power cables.
- Switch OFF the power at the solar module
- Wire the wall mounting base with a two-core cable (minimum
cross-section 0.5 mm²) in accordance with the diagram shown
Green plug of
the solar module
eBus
- Click the BM-Solar programming module into the wall mounting
base as shown in the diagram
- Switch ON the power at the solar module
Terminal strip
Wall mounting base
3061916_0611