System On / Off; Specification - Wolf BM-Solar Installation And Operating Instructions Manual

System ON / OFF

Specification

18
System ON / OFF
The solar module can be switched ON and OFF with the
ON / OFF pushbutton.
To prevent the system being switched OFF accidentally, the
pushbutton needs to be held down for at least 3 seconds to effect
a shutdown. A brief activation of the pushbutton is sufficient to
start the system again.
When the system is shut down, the display shows
the collector temperature.
Example:
NB
In the shutdown state, no protective functions are enabled
(except anti-seizing pump protection).
Specification
Supply voltage:
Power consumption:
Protection:
Ambient temperature: 0....50 °C
Storage temperature: -20....+60 °C
eBUS 15 – 24 V
Max. 0.5 W
With wall mounting base: IP30
Module installation: IP30
ff instead of
o
3061916_0611