Rx Setup Page - Planet Networking & Communication IHD-210PR User Manual

4.1.4 Rx Setup Page

On the "Rx Setup page", please select the Rx device first by the "Rx Device Selection" and then the
relevant setting information of the selected Rx device will be shown in the "Rx Device Info" area.
Description
Device IP Show the selected device's IP address.
Rx Version Show the firmware version.
Tx Device IP
If the Rx connects to Tx successfully, it will show the Tx's IP address.
LAN Status
If the device connects to LAN successfully, it will show "Link Up".
1. Lock: The video is transmitting.
Video Lock
2. Unlock: There is no transmitting video.
If the transmitting video supports HDCP, it will show "on".
HDCP
If the transmitting video does not support HDCP, it will show "off".
Setting the IP address of the selected device --
IP Setup By default, the IP address is 169.254.xxx.xxx. After changing the setting, please click
the update button and then click the reboot button to make the change effective.
Screen On: The device displays the video.
Screen Mode
Screen Off: The device does not display the video.
OSD 1. Info Display Auto Mode: The selected RX will always show OSD for a while, and
High Definition HDMI Extender over IP with PoE
Function
31
IHD-210PT / IHD-210PR