Tx Setup Page - Planet Networking & Communication IHD-210PR User Manual

4.1.3 Tx Setup Page

On the "Tx Setup page", please select the Tx device first by the "Tx Device Selection" and then the
relevant setting information of the selected Tx device will be shown in the "Tx Device Info" area.
Description
Device IP Show the selected device's IP address.
Tx Version Show the firmware version.
Encoder
Show the Encoder version.
Version
LAN Status
If the device connects to LAN successfully, it will show "Link Up".
Lock: The video is transmitting.
Video Lock
Unlock: There is no transmitting video.
If the transmitting video supports HDCP, it will show "on".
HDCP
If the transmitting video does not support HDCP, it will show "off".
Setting the IP address of the selected device --
IP Setup By default, the IP address is 169.254.xxx.xxx. After changing the setting, please click
the update button and then click the reboot button to make the change effective.
Setting the resolution's video bit rate of each group on the selected Tx --
Video Bitrate After changing the setting, please click the update button to make the change
effective.
High Definition HDMI Extender over IP with PoE
Function
29
IHD-210PT / IHD-210PR