Installation and Operation Guide SOLECTRIA XGI 1000 (Rev D)
7.2.1 DC Fans
Align both fans so the fans blow INTO the inverter. The arrow will be pointed into the inverter and the label will
not be visible. After servicing the fans, replace the assembly and torque the screw to 20 in-lbs (2.3 N-m). See
Figure 7-2 to remove the DC fans.
7.2.2 AC Fan
Align the fan so the fan blows OUT of the inverter. The arrow will be pointed out of the inverter and the label will
be visible. After servicing the fan, replace the assembly and torque the screw to 20 in-lbs (2.3 N-m). See
Figure 7-2 to remove the AC fan.
WiFi Connection Error
7.3
When connecting to the inverter, if the xgi.solar page gives a "page not found" error, disable mobile data on the
smart device.
DOCR-070733-D
Page 78 of 86