YASKAWA XGI 1000-65/65 Installation And Operation Manual page 10

Installation and Operation Guide SOLECTRIA XGI 1000 (Rev D)
Inverter Mounting Angle
The acceptable mounting angle range is 5 to 90 degrees measured from horizontal, as shown in Figure 2-5.
Make sure the Wiring Box is below the Power Head. Regardless of the installation angle, the bottom edge of the
Wiring Box must be parallel to the ground (no side-to-side tilting).
Figure 2-5 Inverter Mounted Correctly Between 5 and 90° from Horizontal and Level to Ground
Do not install the inverter with the Power Head below the Wiring Box nor with the base of the Wiring Box not
parallel to ground.
X
Inverter Mounted Incorrectly with Power Head below the Wiring Box (Left) and Not
Figure 2-6
Parallel to Ground (Right)
DOCR-070733-D Page 10 of 86