Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 539

Network establishment and testing
...................................................................................................................................................................................................................................
Result:
field is populated with the SC IP addresses of E-D and E-B.
...................................................................................................................................................................................................
Click OK.
20
Result:
the configured paths. The first path is highlighted in green, the second (protection)
path in orange.
...................................................................................................................................................................................................
21 Start a signal transmission via both analyzers.
...................................................................................................................................................................................................
Check that no bit errors are present.
22
E
N D O F
...................................................................................................................................................................................................
Test procedure
Proceed as follows to perform the test:
...................................................................................................................................................................................................
Remove the fiber connection between E-C and E-D.
1
Result:
the second path between E-A, E-D, E-B and E-C in green.
...................................................................................................................................................................................................
Check that no bit errors are present.
2
E
N D O F
...................................................................................................................................................................................................
...................................................................................................................................................................................................................................
365-374-198R10.5.4
Issue 1 July 2009
The Explicit Routing Node List Selection Dialog disappears. The Path 2
The Create New Path screen disappears and the etwork Map will display
S T E P S
The first path between E-A, E-B, E-D and E-C is highlighted in red,
S T E P S
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Procedure 10-21: 1+1 protection test
ONNS test
10-101