Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •...
Risk of cutting injury! Wear protective glasses! Wireless data transfer Hilti Li-ion battery type series used. Observe the information given in the section headed In- tended use. Product information products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products.
Page 8
▶ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. ▶ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height or show signs of damage. In this case, always contact your Hilti Service. ▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable location, well away from flammable materials, where it can be kept under observation and allowed to cool down.
▶ Use only Hilti lithiumion batteries of the B 22 series with this product. ▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
Troubleshooting section. Items supplied Crimping / pressing and cutting tool, operating instructions. Other system products approved for use with this product can be found at your local HILTI STORE or online at: www.hilti.group Selecting the crimping / pressing die A table to assist with selecting the type of crimping / pressing die to be used can be found at the end of these operating instructions.
Operation Preparations at the workplace CAUTION Risk of injury by inadvertent starting! ▶ Before inserting the battery, make sure that the product is switched off. ▶ Remove the battery before making any adjustments to the power tool or before changing accessories. Observe the safety instructions and warnings in this documentation and on the product.
2. Press the locking pins. 3. Rotate the locking pins counterclockwise as far as they will go. 4. Pull out the locking pins. 5. Fit the crimping / pressing or cutting jaws. 6. Push the locking pins in until they engage. 7.
1. Remove the battery. 2. Select a suitable crimping die. Push the two halves of the crimping / pressing die in until they engage. Removing the crimping die (only for crimping jaws with crimping dies) WARNING Risk of injury! Unintentional starting. ▶...
▶ Do not use a metal chain as a retaining leash. Do not use retaining leashes longer than 6 ft (2 m). To avoid damage and injury, when working at a height it is advisable to use the Hilti retaining strap.
5.11 Dismantle the Hilti retaining leash (optional) 1. Remove the battery. 2. Remove the two retaining strap securing screws. 3. Pull the two retaining strap tabs out of the slots in the base and remove the retaining strap. 4. Refit the battery.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Store or online at: www.hilti.group.
▶ Check the tool and batteries for damage before use after long periods of storage. Troubleshooting If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service. The crimping / cutting tool is not in working order. Malfunction...
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting. ▶ Dispose of your battery out of the reach of children. ▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public health and safety resources for disposal instructions.