Maintenance – Replacing Parts - Samson 43-1 Mounting And Operating Instructions

Maintenance - Replacing parts
4. Maintenance - Replacing parts
Note
If you intend carrying out mainten-
ance work on the temperature regu-
lator, first relieve the corresponding
plant section of pressure and, de-
pending on the process medium,
drain it as well.
Let the plant section cool down to
reach ambient temperature, if
necessary.
We recommend removing the regu-
lator from the pipeline.
4.1 Cleaning or replacing the plug
8
EB 2171 EN
Note: To replace the seat, a special tool is
additionally required. Refer to the
EB 029 EN (formerly WA 029 EN) for the
product numbers 2710 to 2730 (also avail-
able on the Internet at http://www.sam-
son.de/pdf_en/e00290en.pdf).
Fig. 5 ⋅ Socket wrench
17
SW 19