Honda CRF450L 2019 Owner's Manual & Off-Road Handbook page 91

3. Insert the clutch lifter rod (11) into the
mainshaft.
4. Install the clutch lifter (12) onto the rod.
(11)
(11) clutch lifter rod (12) clutch lifter
5. Install the clutch pressure plate (13).
6. Install the six clutch springs and bolts (14).
7. Tighten the bolts in a crisscross pattern in two
or three steps to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
(14)
(13) clutch pressure plate
(14) clutch spring bolts and springs
8. Apply engine oil to a new O-ring (15) and
install it in the groove of the clutch cover (16).
9. Install the cover by tightening the six cover
bolts in a crisscross pattern in two or three
steps to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(12)
(16)
(15) O-ring (new)
(16) clutch cover
10. Install the right crankcase over cover (17) and
tighten the four right crankcase over cover
bolts (18).
(13)
(17) over cover
11. Pour recommended engine oil to the specified
level (page 70).
(15)
(17)
(18)
(18) bolts
Clutch System
85
Servicing Your Honda