Honda CRF450L 2019 Owner's Manual & Off-Road Handbook page 57

7. Install the harness band clip (7) to the stopper
cable guide (8).
Connect the fuel pump connector (9).
(9) (7)
(7) harness band clip (9) fuel pump connector
(8) stopper cable guide
8. Install the fuel tank (4) into the frame. Install
the washers (10) and fuel tank bolts (11), then
tighten the bolts to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(11)
(10)
(4)
(4) fuel tank (11) fuel tank bolts
(10) washers
9. Connect the breather tube (12) to the tube joint
(13). Install the breather tube to the tube guide
(14) onto the top shelter (15).
(13)
(8)
(12) breather tube
(13) tube joint
(11)
(10)
(14)
(12)
(15)
(12)
(14) tube guide
(15) top shelter
Fuel Tank
10. Slide the shroud (16) toward the down so that
the shroud tab (17) and the slot (18) on the side
cover (19) is aligned.
11. Install the shroud C bolt (20), B bolt (21) and
shroud A bolt (22).
Tighten the shroud A and B bolts to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Tighten the shroud C bolt to the specified
torque:
3.8 lbf·ft (5.2 N·m, 0.5 kgf·m)
The right and left shrounds can be installed in
the same manner.
(16)
(17)
(19)
(18)
(16) shroud (20) shroud C bolt
(17) tab (21) shroud B bolt
(18) slot (22) shroud A bolt
(19) side cover
12. Install the seat (page 46).
Servicing Your Honda
(20)
(21)
(22)
51