Side Stand - Honda CRF450L 2019 Owner's Manual & Off-Road Handbook

Refer to Important Safety Precautions on page 33.
(1)
(1) side stand spring
• Check that the side stand assembly is working
properly. If the side stand is stiff or squeaky,
clean the pivot area and lubricate the pivot bolt
with molybdenum grease.
• Check the spring for damage or loss of tension.
• Check the side stand ignition cut-off system:
1. Sit on the motorcycle and put the transmission
in neutral.
2. Raise the side stand.
3. Start the engine.
4. Pull the clutch lever in.
5. Shift the transmission into gear.
6. Lower the side stand all the way.
The engine should stop as you lower the side stand.
If the engine doesn't stop, see your dealer for
service.

Side Stand

129
Servicing Your Honda