Maintenance & Care - Bissell POWERFORCE TURBO REWIND 1797 Series User Manual

Using the Height Adjustment
Using the Specialized Tools
Dusting Brush
Extension Wand
Your new PowerForce vacuum not only
does a great job on your floors, it also
comes with a complete set of accessory
tools to make your above floor cleaning
jobs easier. Just put your vacuum in the
Maintaining the TurboBrush Tool
1 Align 2
Slot
Paddle Wheel
Twist gray collar counter-
clockwise, until slot
If paddle wheel gets
appears then separate
dislodged, align the two
faceplate. Carefully
clips on each side and
remove brush, replace
pop into place.
belt and brush if needed.
You can easily raise or lower your vacuum to
adjust to different flooring types. Simply turn
the knob towards the desired flooring type. If
your vacuum becomes too difficult to push,
just move to a higher setting.
Crevice Tool
TurboBrush Tool
upright position, pick the accessory tool
that best fits your needs and attach it
to the end of your hose. You're ready to
clean base boards, curtains, upholstery
and much more.
3
Roller
Belt
The faceplate will not
close properly if all
parts are not aligned
correctly.
www.BISSELL.ca
7