Bissell POWERFORCE TURBO REWIND 1797 Series User Manual page 8

Emptying the Dirt Tank
1
Press the tank release
button and pull handle
to lift dirt tank away
from vacuum.
Cleaning the Pre-Motor Filter
1 2
Press the
tank release
button
and pull
handle to
lift dirt tank
away from
vacuum.
Cleaning the Post-Motor Filter
1
With dirt tank removed, press
filter cover release button to
access post-motor filter.
WARNING
To reduce the risk of electrical shock, press power pedal o and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate the vacuum with damp or wet fi lters, without fi lters in place or with the dirt
tank missing. Allow components to dry before reassembling the dirt tank.
8
www.BISSELL.ca
2
Holding dirt tank
over a trash bin,
press tank release
button on back to
open tank bottom
and dump the
debris.
Snap bottom
back into place
when empty.
3
Remove the pre-
motor filter by
pulling it from the
tank lid. Clean
it with warm
water. Allow to
Open the
completely dry
dirt tank lid
before returning it
by lifting the
back into the dirt
release latch
tank lid.
on the front.
2
Clean all filters with
mild detergent, rinse,
and squeeze all excess
water. Allow filters to
dry completely before
reinserting.