Installing The Printer Driver For A Network Connection; Installing The Printer Driver For The Selected Port - Ricoh Pro C7200 Operating Instructions Manual

Installing the Printer Driver for a Network
Connection
This section describes the installation procedure of the printer drivers for network connection.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
• If the [User Account Control] dialog box appears during the driver installation procedure, click
[Yes] or [Continue].
• If the [Windows Security] dialog box appears during the driver installation procedure, click [Install
this driver software anyway].
• A message appears if there is a newer version of the printer driver already installed. If there is, you
cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add
Printer]. See page 23 "Messages Displayed When Installing the Printer Driver".
• The [AutoPlay] dialog box is displayed only for a few seconds under Windows 8.1/10 and
Windows Server 2012/2012 R2/2016. If the [AutoPlay] dialog box disappears, use the
following procedure to replay the CD-ROM:
• Windows Server 2012
1. On the Charm Bar, click [Search], and then click [Computer].
2. Double-click the CD-ROM drive in which the provided CD-ROM is set, and then click
"Setup.exe".
• Windows 8.1, Windows Server 2012 R2
1. On the desktop, right-click the [Start] button, and then click [File Explorer].
2. Double-click the CD-ROM drive in which the provided CD-ROM is set, and then click
"Setup.exe".
• Windows 10, Windows Server 2016
1. On the desktop, right-click the [Start] button, and then click [File Explorer].
2. Double-click the CD-ROM drive in which the provided CD-ROM is set, and then
doubleclick "Setup.exe".

Installing the Printer Driver for the Selected Port

Describes the driver installation procedure for each printer port. See the installation procedure for the
printer port you are using.

Installing the Printer Driver for a Network Connection

13