Clear The Memories - Kodak X-OMAT Multiloader 300 Installation Instructions Manual

INSTALLATION INSTRUCTIONS
1. Download the selected languages from DRIVE C: to the ML300.
Select INSTALLATION from the MAIN MENU ...........................press ENTER
Select SOFTWARE UPDATE from the menu INSTALLATION ..press ENTER
Select the desired languages (up to 4) .................................press ENTER
Note
ALWAYS SELECT YOUR OWN LANGUAGE FIRST TO OVERRIDE THE DEFAULT LANGUAGES.
THE SELECTED LANGUAGES ARE MARKED WITH AN ASTERISK.
Select SOFTWARE UPDATE ...........................................................press ENTER
Key in YES .......................................................................................press ENTER
The software of the SYSTEM UNIT is now updated. The amber and the red LED on the
OPERATOR DISPLAY are flashing alternately. After the software of the SYSTEM UNIT is
downloaded, the error code 00 00 00 00 00 is displayed and the green LED on PCB A1 is
switched on.
The software of the CASSETTE UNIT is now updated. The red LED on PCB A8 is flashing.
The software of the MAGAZINE UNIT is now updated. The red LED on PCB A4 is flashing.
The complete operating software is downloaded and the red LED at the OPERATOR
CONTROL PANEL is switched on.
2. Switch off the ML300.
Wait 5 seconds.
Switch on the ML300 again.
3. Exit the SOFTWARE UPDATE PROGRAM.
Press any key at the LAP TOP
Select RETURN from SOFTWARE UPDATE .................................press ENTER

5. CLEAR THE MEMORIES

Clear the memories to ensure that all COUNTERS are RESET.
Start the SERVICE PROGRAM
Select SERVICE MODE from the GLOBAL MENU ...................press ENTER
ENTER SERVICE MODE MESSAGE is displayed........................press ENTER
UNIT DATA are displayed ............................................................press ENTER
Select CHANGE ML300 DATA from the MAIN MENU ...........press ENTER
Select CLEAR MEMORIES .............................................................press ENTER
Select CLEAR ALL MEMORIES .....................................................press ENTER
Select YES ........................................................................................press ENTER
Press BACKSPACE
Select GRAND TOTAL COUNTER ................................................press ENTER
Select YES ........................................................................................press ENTER
Press BACKSPACE
8/1998 10-4
II 3058-4
KODAK AG Stuttgart