Consumable Parts And Ac Adapter - Star Micronics TSP1000 Series User Manual

3. Consumable Parts and AC Adapter

When consumable parts have run out, use those specified in the table below.
Make sure that the AC adapter specified in the table is used.
Use of consumable parts or an AC adapter which are not specified in the table may
result in damage to the printer, fire or electric shock.
(1) Roll paper specifications
Thermal paper
Thickness: 65 to 150 µ m
Width: 44.5±0.5 to 82.5±0.5 mm
Outer roll diameter: Max. ø180 mm
Take up paper roll width: 45 to 83 mm
Core outer/inner diameter
Paper thickness
65 – 100 µ m
100 – 150 µ m
Printed surface: Outer surface of roll
Tail end handling: Do not use paste or glue to secure the roll paper or
(2) Recommended paper
Mitsubishi Paper Mills Limited
T8037 (tickets), 85 µ m (thickness)
TF8067 (tickets), 84 µ m (thickness)
TF8075 (tickets), 85 µ m (thickness)
KANZAN
KLS46 (tickets)
KPO460 (tickets)
Kanzaki Specialty Papers Inc. (KSP)
Lotto482 (tickets), 84 µ m (thickness)
Depending on the type and thickness of the paper, it may be necessary to change
the settings for printing darkness. To change the darkness settings, use the
printing darkness settings command <ESC><RS> 'd' n or the memory switch
settings. Refer to the separate Specification Manual for details.
(When using drop-in paper loading)
Max. ø170 mm
(When using roll paper shaft)
+0.5 +0.5
-1 -1
Core outer
Max. ø40±1 mm
Max. ø58±1 mm
its core.
Do not fold the tail end of the paper.
– 4 –
Core inner
Max. ø25.4±1 mm
Max. ø50.8±1 mm