Consumable Parts And Ac Adapter; General Thermal Paper Roll; Paper Roll Specifications - Star Micronics FVP10 series Hardware Manual

5. Consumable Parts and AC Adapter

Use paper that meets the specifications.
5-1. General Thermal Paper Roll
5-1-1. Paper Roll Specifications
(1) Paper thickness:
(2) Paper width:
(3) Outer roll diameter:
(4) Core inner and outer diameters:
(5) Printed surface:
Note 1: Do not glue or tape the paper roll and shaft core together.
2: Do not fold the tail end of the paper.
3: We do not recommend the use of paper that has black marks printed on its near-end-sensor side, because near-end
sensing may fail when the near-end sensor deteriorates.
65 µm to 150 µm (excluding Mitsubishi HiTec F5041)
79.5 ± 0.5 mm
57.5 ± 0.5 mm
Note: Never change the paper width while the printer is in use.
ø83 mm or less
Take up paper roll width: 80
65 µm to 75 µm: core inner ø12 ± 1 mm, core outer ø18 ± 1 mm
core inner ø25.4 ± 1 mm, core outer ø32 ± 1 mm
75 µm to 150 µm: core inner ø25.4 ± 1 mm, core outer ø32 ± 1 mm
Outer edge of roll * Do not use inner-wrapped paper rolls.
+0.5 +0.5
mm
mm or 58
- 1 - 1
- 24 -