Consumable Parts And Ac Adapter; General Thermal Paper Roll; Paper Roll Specifications; Recommended Paper Roll - Star Micronics FVP-10U Hardware Manual

Star micronics fvp-10u: hardware guide
Hide thumbs Also See for FVP-10U:
Table of Contents

Advertisement

5. Consumable Parts and AC Adapter

Use paper that meets the specifications.
5-1. General Thermal Paper Roll
5-1-1. Paper Roll Specifications
(1) Paper thickness:
(2) Paper width:
(3) Outer roll diameter:
(4) Core inner and outer diameters:
(5) Printed surface:
Note 1: Do not glue or tape the paper roll and shaft core together.
2: Do not fold the tail end of the paper.
3: W e do not recommend the use of paper that has black marks printed on its near-end-sensor side, because near-end
sensing may fail when the near-end sensor deteriorates.
Recommended Paper Roll
5-1-2.
Manufacturer
Mitsubishi Paper
Mills Limited
Mitsubishi HiTec
Paper Flensburg
GmbH
Oji Paper Co., Ltd.
Nippon Paper
Industries
KSP
Note 1) D epending on the type and thickness of the paper, it may be necessary to change the settings for printing dark-
ness. To change the darkness settings, use the printing darkness settings command <ESC><RS> 'd' n. Refer to
the separate programmer's manual for details.
2) T he print density may vary depending on the type of paper roll, operating environment, and low peak current
mode.
3) A reader or scanner may not be able to scan a printed bar code or characters depending on the print density.
Make sure that your reader or scanner is able to scan them correctly beforehand.
65 µm to 150 µm (excluding Mitsubishi HiTec F5041)
79.5 ± 0.5 mm
57.5 ± 0.5 mm
Note: Never change the paper width while the printer is in use.
ø83 mm or less
Take up paper roll width: 0
65 µm to 75 µm: core inner ø12 ± 1 mm, core outer ø18 ± 1 mm
core inner ø25.4 ± 1 mm, core outer ø32 ± 1 mm
75 µm to 150 µm: core inner ø25.4 ± 1 mm, core outer ø32 ± 1 mm
Outer edge of roll * Do not use inner-wrapped paper rolls.
Product name
P0AG
HP0A
HP0AB-
P0AGB
P0AC-
P220AE-1
PB670
F5041
PD0R
PD0R
TF50KS-E2D
TF60KS-E
P-0
P320BB / P320BB
+0.
+0.
mm
mm or 58
- 
- 
Quality characteristics and use
normal type paper
high image stability paper
high image stability paper
normal type paper, card ticket
normal type paper, card ticket
normal type paper, card ticket
2 color type (red and black)
normal type paper
normal type paper
high image stability paper
normal type paper
normal type paper
normal type paper
2 color type (red and black, blue and black)
-  -
Paper thickness
(µm)


75
0

0
75
0
75
65/75

75



Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fvp10 series

Table of Contents