Chromatherapy Operation - Jacuzzi LG72000 Installation Manual & Warranty Information

Hide thumbs

Table of Contents

Available languages

Installation

CHROMATHERAPY

• Press once to turn lights ON at

white level 2.

• Press again to cycle colors.

• Press again to stop at the current

color.

• Press again to restart the cycle.

If Chromatherapy fails to work:

•

Reset the GFCI.

•

Ensure the plug is fully in the outlet.

•

Ensure the connectors to the control panel and control box are fully engaged in receptacles.

•

Contact your electrician to ensure the proper wiring and power is being supplied to the GFCI.

•

Contact Jacuzzi Luxury Bath if the above does not resolve the issue.

DANGER:

Risk of electric shock!

Before you begin your installation, please read the following:

•

Observe all local and building codes.

•

Determine which tools will be used during the installation.

•

Additional bathtub drain parts and plumbing are commercially available at plumbing and hardware stores.

1. Install drain/overflow according to the manufacturer's instructions. Refer also to the Technical Specifications Manual.

Watertight installation of the drain is the installer's responsibility. Drain leakage is excluded from the Jacuzzi

Luxury Bath warranty of this product.

2. Install the faucet at this time (if applicable). It is recommended that the faucet be installed by a qualified plumber. See

special notes on freestanding section for faucetry.

Proper installation of the spout plumbing and compliance with local codes are the responsibility of the in-

staller. Jacuzzi Luxury Bath does not warrant connections of water supply fittings and piping, fill systems, or

drain/overflow systems. Nor is it responsible for damage to the bathtub which may occur during installation.

A non-flammable protective barrier must be placed between the soldering work and the bathtub unit to pre-

vent damage to the bathtub.