View Graphs Tab - Trane Tracer Uc

View Graphs Tab

The View Graphs tab contains controls used to set up and generate graphs (line charts) presenting
a subgroup of logged data points. Use predefined templates or define custom graphs. The user can
save the graph definition as a new template.
Note: Only archived data can be viewed. However, data from a connected controller can be
Select Graph Template
When the tab displays, this field are pre-populated. Leave the default response as is.
Choose Data (Settings)
This group box is the container for all of the following data selection controls.
•
•
•
•
•
•
•
•
•
•
•
•
VAV-SVX07B-EN
captured and viewed at any time, by selecting Retrieve Data Logs from the Tools menu, then
choosing the archived data file after the selected logs are retrieved.
Data Source Box: Click on Archived Data File to browse the computer for UC400 data logs.
Select the Device Data file, then click open to populate the Available Data field.
Available Data: Displays the Device Data file which has been selected for viewing.
Arrow Buttons: Use the arrow buttons to transfer items between the Available Data Objects
box and the Selected Data box.
Selected Data: Each box contains one of the selected data points. The color boxes indicate
the color line that is used to graph that data point on the generated chart.
Graph Titles (Lines 1 and 2): Use these entry boxes to specify a one- or two-line title for the
graph.
Axis Labels: Use these entry boxes to specify a short label for the graph axis.
Save as Template: Use this button to save the graph definition as a reusable template.
Start Graph: Click this button to start graphing the specified data points.
The Display Graph window displays after clicking Start Graph. It displays the generated graph
defined in the Selected Data box. A legend is provided to pair colors with selected data points. 

The following controls appear on the Display Graph window.
– Data/Save: Use this button to save the captured data in a comma separated variable (CSV)
format file written to the hard drive. All data recorded on the chart is saved in the file.
Graph Image
– Print: Use this button to print the graph image.
– Preview: Use this button to preview the graph image before printing.
– Save: Use this button to save the graph image to a file for subsequent printing and analysis.
– Copy: Use this button to copy the graph image into the clipboard and paste it in a file.
Zoom
– Zoom Reset: Click this button to restore the graph to its original appearance after zooming
in on an area of interest. Drag red line over selected time interval to zoom in on smaller area
of captured data. The reset button is located in the lower left-hand corner of graph when in
zoom mode.
Show Legend: Use this check box to show and hide the legend that displays the corresponding
color of each data point.
Close: Use this button to close the graph window.
Tracer™ UC400 Controller Operations
35