Checking Coolant - Shindaiwa DG1000MI Owner's And Operator's Manual

Vertical, water-cooled 4-cycle diesel engine
Hide thumbs Also See for DG1000MI:
Table of Contents

Advertisement

(1) Types of Engine Oil
Use the API class CD grade or higher.
(2) Engine Oil Viscosity
Use a diesel engine oil with an appropriate viscosity corresponding to the ambient
temperature (refer to the table).
 Relation of Viscosity/Temperature
Temp
(degree
Celsius
(3) Engine Oil Replacement Amount

8-2. Checking Coolant

CAUTION : BURNS
Do not open the radiator cap immediately after stopping the engine, to avoid
sustaining burns from hot vapor.
Hot steam gushes out from the coolant sub-tank if the generator overheats.
Do not touch the coolant sub-tank.
Check that the sub-tank coolant level is in between FULL and LOW. If the sub-tank coolant is
lower than the LOW level, add coolant to the sub-tank and radiator.
(1) Filling the Sub-Tank
1
Remove the sub-tank cap.
Fill the sub-tank with coolant until it reaches the
2
FULL line.
3
Re-attach the cap.
SAE20/20W
SAE10W
-15
-30
)
SAE10W-30
SAE15W-40/20W-40
Total Lubrication Oil Amount
22 (2.0)
Value in parenthesis is the filter capacity.
25
SAE40
SAE30
25 30
0
15
(Unit:L)
FULL
LOW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg1000anz

Table of Contents