Table of Contents
Advertisement
5.
Equipment
5-1. Warning Indicators
WARNING : INJURY
Close all doors and place locks during operation, to avoid injuries by
unintentionally contact with moving parts such as the cooling fan and fan belt.
Before performing any equipment check or maintenance, stop the engine, and
remove the engine key. A person performing the maintenance should always
keep the key.
CAUTION : BURNS
Do not touch the engine and surrounding components immediately after
stopping the equipment, while temperature can reach extremely high.
The equipment is incorporated in monitoring function of WATER TEMP, BATTERY
CHARGING & OIL PRESSURE.
Under normal condition, when the starter switch changes from STOP to RUN, all the
lamps of BATTERY CHARGING and OIL PRESSURE turn ON. When the engine
starts, all the lamps turn OFF.
When abnormality is detected about WATER TEMP and OIL PRESSURE, the
corresponding monitor lamp will flash, and the engine is automatically shutdown.
When the automatic shutdown is engaged, turn the starter switch to STOP position
once, and then restart the engine. In the event the automatic shutdown happens
after that, check which lamp turns ON or OFF and point out where is the
abnormality.
9
Advertisement
Table of Contents
