Actron CP9190 User Manual page 30

Getting Started
17-Pin MECS
To
Scan Tool
2
MECS Ford Probe
IMPORTANT
Connect the pigtail to the BLACK STI connector located farther back on
the wire harness. If the tool is connected to the WHITE tach connector,
serious damage may result and may void warranty. Refer to the
illustration.
2 – 12 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Adapter Cable
6-Pin MECS
P/N CP9131
STI Pigtail
Clip to good
vehicle ground
Certain Ford Probes have a WHITE TACH
CONNECTOR located very close to the 6-pin
self-test connector and bundled in the same wiring
harness. This is not the self-test input (STI) pigtail.
Vehicle DLC
17-Pin MECS
STO