Song Mode; To Access Song Mode; To Exit Song Mode; Selecting / Playing Songs - Roland SE-02 User Manual

SONG MODE

A song consists of 1 - 16 parts. For each part, you can specify a pattern, the number of times that the pattern is
repeated, and the sound/patch used during playback. Up to 16 songs can be stored.

TO ACCESS SONG MODE

Set the mode select switch to SONG

TO EXIT SONG MODE

Press STOP and set the mode select switch to PATCH mode.

SELECTING / PLAYING SONGS

1. Make the function select buttons EDIT - DELETE all go dark.
2. Use the [1] - [16] buttons to select a song. The button you press is lit.
3. Press the PLAY button to play the song. Each time you press the button, the song plays or stops. You can
also select the next song while a song is playing. When the current song finishes playing, the next song
starts playing.

EDITING A SONG

1. Select the song that you want to edit
2. Press the EDIT button - The EDIT button and PTN button light.

CHANGING THE PATTERN

1. Use the VALUE knob to select the part whose pattern you want to change.
2. Use the [0] - [9] buttons to enter a pattern number (1-128) The display shows the pattern number.
• Pressing the INS button inserts a blank part at the currently selected part. A part cannot be inserted if
the 16 parts are already being used.
• Pressing the DEL button deletes the currently selected part; subsequent parts are adjusted forward.
• Press the PLAY button to play/stop the song.

CHANGING THE NUMBER OF REPETITIONS

1. Press the PTN button to make it blink.
2. Use the VALUE knob to select the part whose number of pattern repetitions you want to change.
3. Use the [0] - [9] buttons to enter the number of repetitions.
• Pressing the INS button inserts a blank part at the currently selected part. A part cannot be inserted if 16
parts already being used.
• Pressing the DEL button deletes the currently selected part; subsequent parts are adjusted forward.
• Pressing the PLAY/STOP button to PLAY/STOP the song.
Page 24 of 35 Manual V1.03 for firmware V1.11