Storage; Maintenance - Stamina Viper VG1500 Owner's Manual

STORAGE

To store the VG1500

MAINTENANCE

The safety and integrity designed into the VG1500
VG1500 TM Leverage System is regularly examined for damage and wear. Special attention should be given
to the following:
1. Verify that the warning and notice labels are in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement label if labels are missing or damaged.
2. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
3. Worn or damaged components shall be replaced immediately and the VG1500
removed from service until repair is made.
Verify that the cables are properly installed on all pulleys.
4.
5. Check the condition of the cables. Replace the cables if the coatings are cracked or broken.
Check the pulleys for excessive wear. Replace worn pulleys.
6.
7. Only Stamina Products supplied components shall be used to maintain/repair the VG1500
.
System
8. Keep your VG1500
TM Leverage System simply keep it in a clean dry place.
TM
Leverage System clean by wiping with an absorbent cloth after use.
TM Leverage System can only be maintained when the
15
TM
Leverage System
TM
Leverage