Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com
LEFT
STEP 1:
Insert the
LOCKING KNOB(31).
FRONT STABILIZER(2)
NOTE:
Pull the
FRONT STABILIZER(2)
Adjust the
FRONT STABILIZER(2)
STEP 2
RIGHT PEDAL(6)
NOTE:
The
has right hand threads and is tightened by turning clockwise. The
on the end of the pedal shaft. The
turning counter clockwise.
RIGHT PEDAL(6)
Thread the
Do the same to attach the
STEP 3:
Install two
METER(29),
the
then slide the
FRONT STABILIZER(2)
to adjust the position. Tighten the
R
has
stamped on the end of the pedal shaft. The
onto the right side of the
LEFT PEDAL(5)
"AA"
batteries into the back of the
METER(29)
BRACKET
MAIN FRAME(1)
into the
out for use. Push the
by loosening the
LEFT PEDAL(5)
CRANK(7)
onto the left side of the
METER(29).
onto the Bracket on the
6
and lock in position with the
FRONT STABILIZER(2)
LOCKING KNOB(31),
LOCKING KNOB(31).
LEFT PEDAL(5)
has left hand threads and is tightened by
as shown. Tighten the pedal securely.
CRANK(7).
SENSOR WIRE(28)
Plug the
MAIN FRAME(1).
RIGHT
in for storage.
then slide the
RIGHT PEDAL(6)
L
has
stamped
to
Advertisement
Table of Contents
