State Obd Check - Actron Elite AutoScanner CP9185 User Manual

Global OBD II Diagnostics

State OBD Check

The State OBD Check function is used to display a basic status of the
vehicles OBD system.
Erase Codes deletes DTCs and clears I/M Monitors from vehicle's
computer module(s).
The State OBD Check function has the following areas:
4 4
State OBD Check should be done with the key on engine running
(KOER) due to showing MIL status.
The number of codes found are only Generic OBD II codes and not
Pending codes.
The number of Monitors that are either OK, INC or NA are only Since
DTCs Cleared and not This Drive Cycle.
Refer to Read Codes and I/M Monitors for more detailed information
about the results.
4 – 26 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Malfunction Indicator Lamp (MIL) Status
Codes Found
I/M Readiness
MIL STATUS ON or OFF
Number of Codes Found
Number of Monitors OK
Number of Monitors Inc
Number of Monitors N/A