Global OBD II Diagnostics
4. After recording, Scan Tool
Diagnostic Codes Menu
IMPORTANT
4 4
– Review Data
– Print Data
– Code Lookup
– Tool Setup
Read Codes
The Read Codes function allows the Scan Tool to read the DTCs from
the vehicle's control modules. DTCs are used to help determine the
cause of a problem or problems with a vehicle. These codes cause the
control module to illuminate the malfunction indicator lamp (MIL)
when emission-related or driveability fault occurs. MIL is also known
as service engine soon or check engine lamp.
4 – 12 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
displays a prompt to
Playback Data.
• Answer No to return to
Datastream Menu.
•Answer Yes to display
recorded data.
Refer to Playback from
Review Data and press
ENTER.
Items marked with "-" are covered in section 3 of this
manual. These items are not covered in this section.
Diagnostic Codes Menu
Read Codes
Pending Codes
Erase Codes
View Freeze Data
Record Data
Playback Data?
<Yes>
<No>