Global OBD II Diagnostics
Read Codes can be done with the key on engine off (KOEO) or with
the key on engine running (KOER).
From Diagnostic Codes Menu:
1. Select Read Codes.
•Use
key until Read Codes is
highlighted.
•Press
If no DTCs are present a message stating System Pass: No Faults
Detected is displayed.
2. View and write down DTCs.
•Use
In the example shown module
(MOD) $18 is reporting the
DTCs.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 13
UP or
DOWN arrow
ENTER.
UP or
DOWN arrow key.
Diagnostic Codes Menu
Read Codes
Read Codes
Pending Codes
Erase Codes
View Fre eze Data
Review Data
Print Data
Code Lookup
P0113
MOD $18
IAT Sensor 1
Circuit High Input
4
1 of 3