Actron Elite AutoScanner CP9185 User Manual page 75

Global OBD II Diagnostics
3. From the Pick Trigger
Method Screen.
•Use
key until desired trigger
method is highlighted.
•Press
When trigger event (either a DTC or a Press of the
occurs, time is recorded and data is saved.
Record Data
Waiting for trouble
code to trigger
start of recording.
Press BACK
to exit.
Data continues to be saved until
either:
Record memory is full.
Operator presses
Scan Tool recording times vary. A recording consists of frames of data
prior to trigger and several frames after trigger.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 11
UP or DOWN arrow
ENTER.
ENTER.
Pick Trigger Method
Manual Trigger Manual Trigger
Trigger on Codes
ENTER key)
Record Data
Ready to record.
Press Enter
to start recording.
Press BACK
to exit.
Record Data
**Recording Data**
Frame xx of yy.
Press ENTER
to stop.
4