Transec Interface Commands / Queries - Comtech EF Data SLM-5650B Installation And Operation Manual

C.6.10

TRANSEC Interface Commands / Queries

The instruction codes that follow are valid only when the optional TRANSEC Interface Module is installed in the SLM-5650B Satellite
Modem.
Command
Arguments
Parameter
(Instruction for Command
Code and or Response
Type
Qualifier)
Transec SMG= 15 bytes
Ethernet
Interface
Gateway IP
Address
Transec SMI= 18 bytes
Ethernet
Interface
Management IP
Address and
Range
Transec N/A 12 bytes
Ethernet
Interface
Management
MAC
Appendix C
Description of Arguments
to Query
Command or Query.
Used to set the Gateway IP address for the Transec Management
port in the form aaa.bbb.ccc.ddd, where:
aaa.bbb.ccc.ddd = IP address
Example: SMG = 010.006.030.001
Command or Query.
Used to set the IP address and network prefix for the Transec
Management port in the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP address
ee = network prefix (0-31)
Example: SMI = 010.006.030.001.24
Query only.
Returns the Transec's Ethernet Management MAC
Example: SMM = 0006B003780C
Response to
Command
N/A
N/A
N/A
C–65
SLM-5650B Satellite Modem
Revision 2
Query
(Instruction
Response to Query
Code and
Qualifier)
SMG? SMG=
aaa.bbb.ccc.ddd
(see Description of
Arguments)
SMI? SMI=aaa.bbb.ccc
.ddd.ee
(see Description of
Arguments)
SMM? SMM=
xxxxxxxxxxxx
(see Description of
Arguments)
MN-SLM-5650B