Table of Contents
Advertisement
Step
Task
To update the Network Processor Bulk firmware:
10
Open the Admin | Upgrade page:
a)
b)
In the Upgrade section of the page, locate the update file downloaded to the PC during Steps 2 through 4:
Click [Browse]. The Choose File dialog box will open.
•
Locate the folder created for the file download; double-click on the folder name to open the folder.
•
Select the update file, then click [Open]. The filename should appear in the Upgrade Image File text box.
c)
Click [Upload] to begin the Image Upgrade process.
d)
Wait while the file transfers. After [Upload] is clicked, the Image Upgrade page appears while the Network
11
Processor first transfers, and then uploads, the update file from the PC. Allow sufficient time for the file to be loaded
into the NP Module – uploading will take approximately five minutes.
It is not necessary to wait five minutes before clicking [OK], but you MUST wait five minutes before
rebooting the modem.
During the upload process, the page displays a transfer progress bar that provides the scrolling percentage of
completion. During transfer, the message Please Wait... displays:
Updating Firmware
4–11
SLM-5650B Satellite Modem
Revision 2
MN-SLM-5650B
Advertisement
Table of Contents
