Table of Contents
Advertisement
Hint: Do not tell callers that you are out of town or not home. Instead, say that you cannot come to the phone
right now.
Follow these steps to record your announcement.
1
Press
CHANGE
the announcement after the tone. Press
2
The message counter displays the length of the announcement in seconds. Your announcement can be up
to three minutes long.
3
Speak your message from about 9 inches in front of the TAD.
4
When you finish, press
To hear the announcement, press
plays.
Changing Your Recorded Announcement
To change your recorded announcement, simply record a new announcement over the existing one.
To delete your recorded announcement and return to the prerecorded an-
nouncement, press
pears briefly.
REVIEWING THE TAD SETTINGS
To hear all feature settings, press
SETTING THE NUMBER OF RINGS
The TAD is preset to sound four rings before it answers the first call. Use ring select to set how many times the
phone rings before the system answers. You can set it for 1 to 7 rings, or to
To change the ring select setting, press
is ..." and follow the voice prompt instructions. Press
Note: If you plan to check your messages by long distance, set the number of rings to at least four to avoid un-
necessary long distance charges when you call to check your messages (see "Using the Toll-Saver" on
Page 20).
, then press
until the TAD announces "Record
ANNC
STOP
. The TAD beeps and plays back the announcement.
STOP
at any time.
ANNC
while the announcement is playing.
DELETE
once.
SET UP
CHANGE
when you are done."
(announcement playing) appears and the message
AP
dE
ap-
then repeatedly press
SET UP
when you are done.
STOP
Preparation
illustration of
base front
illustration of
base front
for Toll-Saver.
SA
until you hear "Number of rings
9
Advertisement
Table of Contents
