Changing The Remote Access Code; Setting The Handset's Ringer - Radio Shack SP-515 Owner's Manual

Preparation

CHANGING THE REMOTE ACCESS CODE

The remote access feature allows you to access the answering system from a touch-tone phone. The remote
access code is preset to 500, but you can change it to any three-digit number from 500 to 999.
To change the remote access code, press
cess code is ..." and follow the voice prompt instructions. Press

SETTING THE HANDSET'S RINGER

You can turn off the handset's ringer by setting
handset to
10
. Turn it back on by setting
OFF
then repeatedly press
CHANGE
STOP
on the side of the
RINGER
to .
RINGER ON
until you hear "Remote ac-
SET UP
when you are done.