Remote Commands - Radio Shack SP-515 Owner's Manual

Remote Commands

While playing messages:
Press:
0 Hear TAD On/Off status.
1 Play all messages. If no message is recorded, the TAD
says "No messages."
2 Play new messages. If no new message is recorded,
the TAD says, "No new messages."
3 3 Delete all played messages.
5 Stop message playback or recording.
7
Play currently selected announcement.
8 Hear date and time setting.
9 Hear TAD ring selection and remote access code set-
tings.
# Record a memo. When you finish, press 5.
Set the TAD to not answer calls: The TAD says "The
0
machine is off" and beeps twice.
Set the TAD to answer calls: The TAD answers after
10 rings and says "The machine is off" and beeps
twice. Press
and beeps twice.
7 Record new announcement. After the TAD beeps,
speak your message. When you finish, press 5. The
TAD plays your new announcement and beeps twice.
8, then Set date and time.
follow voice
prompts
9, then Change ring selection and remote access code.
follow voice
prompts
Press:
3 Delete current message.
4 Replay message. Each time you press 4, the TAD
backs up one message. Or, hold down 4 to return to a
particular spot within a message and release it to
resume playback at that spot.
5 Stop message playback.
6 Skip to next message. Or, hold down 6 to skip to a par-
ticular spot within a message and release it to resume
playback at the spot.
Remote Operation
To:
0. The TAD says "The machine is on"
To:
21