Operation Of Your New Treadmill; Getting Started - Spirit XT600 Owner's Manual

Operation of Your Treadmill
Getting familiar with the control panel
XT600 / XT800 Console

Getting started:

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as
the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then the Time
and Distance windows will display Odometer readings for a short time. The Time window will
show how many hours the treadmill has been in use and the Distance window will show how
many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has gone. Then a
message will scroll across the message window showing the current software version. The
treadmill will then enter idle mode, which is the starting point for operation.
15