Assembly - Shop-Vac Shop-Pac SP Series User Manual

INSTALLING HARNESS ONTO BACK PLATE
1. Lay harness flat so padded belt is closest to you and fastening
straps are facing up. Open the fastening straps.
2. Place plastic back plate on belt so curved section of back plate
is facing away from belt and tabs on back plate are positioned
between fastening straps.
3. Fold top of left fastening strap tightly over left tab and hold into
position. With other hand fold bottom of fastening strap tightly
over the top portion of strap already against tab. Press top and
bottom of fastening strap securely together making sure strap
is tightly wrapped around tab.
4. Repeat step 3 using right fastening strap and right tab.
5. Fasten belt buckle and pull strap on belt to remove any slack
in strap.

ASSEMBLY

STRAP ADJUSTER
FASTENING
STRAP
BELT
BUCKLE
BELT
BACK PLATE
CURVE
TABS
BACK
PLATE
LEFT FASTENING
STRAP (TOP)
LEFT
LEFT FASTENING
TAB
STRAP (BOTTOM)
BELT
BELT
BUCKLE
STRAP
SHOULDER PAD
SHOULDER STRAP
BELT
STRAP
PAGE 5