Safety Instructions And Measures - Samson TROVIS 5757-7 Mounting And Operating Instructions

Electric actuator with process controller for heating and cooling applications
Table of Contents

Advertisement

Safety instructions and measures

1 Safety instructions and measures
The TROVIS 5757-7 Electric Actuator with Process Controller is an electric actuator with an
integrated digital controller. It is designed for operating a mounted globe valve. In combina-
tion with the valve, the actuator is used to control the flow of liquids or vapors in the pipeline.
The electric actuator with process controller is suitable for closed-loop operation in heating
and cooling applications.
The actuator is designed to operate under exactly defined conditions (e.g. thrust, travel).
Therefore, operators must ensure that the actuator is only used in applications that meet the
specifications used for sizing the actuator at the ordering stage. In case operators intend to
use the actuator in other applications or conditions than specified, SAMSON must be con-
tacted.
SAMSON does not assume any liability for damage resulting from the failure to use the de-
vice for its intended purpose or for damage caused by external forces or any other external
factors.
Î Refer to the technical data for limits and fields of application as well as possible uses. See
section 3.4.
Reasonably foreseeable misuse
The actuator is not suitable for the following applications:
− Use outside the limits defined during sizing and in the technical data
Furthermore, the following activities do not comply with the intended use:
− Use of non-original spare parts
− Performing service and repair work not described in these instructions
Qualifications of operating personnel
The actuator must be mounted, started up, serviced, and repaired by fully trained and quali-
fied personnel only; the accepted industry codes and practices are to be observed. Accord-
ing to these mounting and operating instructions, trained personnel refers to individuals who
are able to judge the work they are assigned to and recognize possible hazards due to their
specialized training, their knowledge and experience as well as their knowledge of the appli-
cable standards.
EB 5757-7 EN
5

Advertisement

Table of Contents
loading

Table of Contents