Sharp SX-51A7 Operation Manual page 9

Optional teletext facility, teletext model
Table of Contents

Advertisement

SKIP
FINE PRESET P-MODE
oopn
CALL
3.
5
SKIP
FINE PRESET P-MODE
a
000
LL
SKIP
FINE PRESET P-MODE
1
4.
1.
SKIP
FINE PRESET P-MODE
@ - @ Resetting Skipped Channels
1.
2.
3.
4.
5.
CALL
.I
2.
VCHA
I
Pp
4.
3
SKIP
FINE PRESET P-MODE
ml
I
5.
SKIP
FINE PRESET P-MODE
00~0
CALL
I
@ - @ Skipping Channels
The Channel
selector (A)
button and
(V
button on the set and remote control normally
cycle through all the channels, 1 through 39
If you wish, you can set the TV so that onl)
selected channels are tuned in
while other
perhaps empty channels,
are skipped.
1.
2.
3.
4.
5.
Press the Preset button.
Select a channel number you wish to skif
with the Channel
selector
(A)
or
(V
button on the TV set or remote control.
Press the Skip button. The displayed than
nel number will turn from green to red.
Repeat steps 2 and 3 if you wish to skip
other channels.
Press the Preset button again to return tc
normal mode. A
green channel number wili
be displayed on the screen.
Note:
If you select the channels to be skipped with the
Channel select buttons on the remote control,
the channel number
will be displayed
in red.
Press the Reset button.
Select a skipped channel number, displayed
in red, with the Channel selector
(A)
or
(V)
button
on the set or on the remote
control.
Press the Skip button,
the displayed
channel number will turn green, and the
channel
will no longer be skipped.
Repeat
steps
2 and 3 for any other
channels
you wish to stop skipping.
Press the Preset button again to return
to normal mode.
Notes:
1)
It
is most practical
to start this process
at
channel number 1, and repeat as needed up
to channel
number 39.
2) The n/ will return to normal mode if you do
not proceed to the next step within about 10
seconds after pressing the Preset button. If it
does, press the Preset button again to execute
the following
step.
3. When the received broadcast signal is weak,
the picture may appear in black and white only
or you may be able to preset the
channel. In
this case, please check the antenna or consul?
your appliance store.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx-51a8

Table of Contents