Sharp SX-51A7 Operation Manual page 12

SKIP FINE PRESET
Lm
;.
iL
1
l-V/VIDEO B
f
I
0
J
23 M
~
OCh
9
annel/Timer call button (1)
( @ )
~
The
channel number and the mode, if the
channel is broadcasting in stereo or bilingual,
is displayed on the screen by pressing the
Channel/Timer call button. Press the button
again and the display will disappear.
If the Channel/Timer call button is pressed
while the Off-Timer is set, the time remaining
on the Off-Timer, the channel number and the
mode, if the channel is broadcasting in stereo
or bilingual is displayed.
If the button is pressed again, the Off-Timer
will disappear leaving the channel number
and the mode, if the channel is broadcasting
in stereo or bilingual. Press the button again
and the display will disappear.
Operation of Infrared Remote Control
@ Normal button (P-N)
(Contrast, Colour, Brightness)
Pressing this button cancels any previous
contrast, colour, and brightness adjustments,
and resets these to the original factory
standard settings.
@
Off-Timer Button ([')
The TV can be turned off automatically after
120, 90, 60 or 30 minutes by using the Off-
Timer button. When the Off-Timer button is
pressed once while watching TV, a El 120 M
display will appear, indicating that the TV will
be turned off automatically after 120 minutes.
Press the button twice for 90 minutes, three
times for 60 minutes, and four times for 30
minutes. When the button is pressed five
times, the mode is cancelled, and nothing will
appear on the screen.