Sharp SX-51A7 Operation Manual page 10

1.2
3.
FINE PRESET P-MODE
mJ
I
P-MODE V/1A
(ON SCREEN)
Contrast Mark
4
f---e
Decrease Increase
Colour Mark
4
f---e
Decrease Increase
Brightness Mark
(ON SCREEN)
Contrast Mark
4
@ I I I I I I I I I ¤==~.==.'=
----_)
Decrease Increase
0
6 Additional Picture Adjustments
(Contrast, Colour, Brightness)
1.
2
3.
Press the Picture mode (P-MODE) button
behind the door or the Picture mode
(P-MODE) button on the remote control.
l
ON-SCREEN
Contrast Mark
@ -99 Red
Colour Mark
@
n
--
Green
Brightness Mark -lG.-
l
mm Green
When you press the Picture mode
(P-MODE) button two times the Colour
Mark will change from green to RED; when
You
press the Picture mode
(P-MODE) button three times the
Brightness Mark will change from green to
RED.
Press the P-mode control until the control
you wish to adjust is red in colour. Press
the volume (A) or (V) or the (A) or the
(V) button on the remote control to adjust
the picture to your liking.
Note:
The display will disappear after about 6 seconds.
Adjust the mode you selected with the Mode
button within this time.
4.
When you press only the Adjustment (I' V
or (A") buttons without pressing the
Picture mode (P-MODE) button on the
remote control you can adjust the
contrast with one touch).
9