Basic Operation; Receiving And Transmitting - Icom IC-SAT100 Basic Manual

4

BASIC OPERATION

■ Receiving and transmitting

D Turning ON the transceiver
z Rotate [VOL] to turn ON the transceiver.
• The transceiver searches a satellite.
• When the transceiver connected and
registered to the satellite, the status
"IDLE," transceiver name, and Talkgroup
name is displayed.
L Push [TG List] to display the Talkgroup
list.
L Rotate Talkgroup selector to select a
talkgroup.
D Receiving
When receiving, "LISTENING," and the
source transceiver's name is displayed,
and audio should be heard.
L Rotate [VOL] to adjust the audio output level.
LISTENING
TRANSCEIVER02
TALKGROUP01
TG List
NOTE:
• The transceiver receives and
transmits using several satellites
orbiting the same orbit. Receiving
and transmitting may fail
depending on the satellite position
or any obstacles between the
transceiver and satellites.
• Your body can also be an
obstacle. Do not hook the
transceiver on your waist.
11
Ignore
D Transmitting
CAUTION: DO NOT transmit without an
antenna.
1. Hold down [PTT].
L "REQUESTING" is displayed
while the transceiver requests the
transmission.
2. When "TALKING" is displayed, speak
at your normal voice level.
L You can continuously transmit up
to the period of time allowed by the
system.
TALKING
TRANSCEIVER01
TALKGROUP01
TG List Scan
D Scan and Ignore
[Scan]
Push to scan a call.
[Ignore]
Push to ignore the received call.
L The Ignore function will be canceled if
there are no more calls for 90 seconds or
longer.